Another Sencore cr70 calibration question

[4thdoctorwho]

Originally Posted by bandersen

Yes, positive voltage are correct when you have the ground lead going to G1 and positive to K (cathode).

Thanks, that is what I figured. Just wanted to be sure.

Do you have any insights regarding my first question on whether the -400V should be steady or is it normal for the voltage to drop while pressing the rejuve button.

[4thdoctorwho]

Does anyone have a cr70 who could do the first two steps of the field test mentioned in the manual.
This is in regards to the question from my OP. It only takes a minute to setup.

Thanks again,
Tony