Teletone verticle size

[timmy]

Originally Posted by dieseljeep

The resistor in the negative source, between the two 30mf caps is a 1.2k 1w wire wound resistor. Red turns brown real easy with heat.
I've seen that type of Micamold resistor and most were tiny wire wounds.
WW resistors seldom change value, especially that much. They, most of the time, just open.

Problem is all the teletone schematics I looked at does not even come close to what I have here and this resistor don't look WW , it's flat . and mine is wired completely different then that of all the schematics out there. Some have ballast some don't some have 6x5 some don't. This resistor is not between 2 caps I already seen that in the schematic , it is so different.