Packard Bell AGC issue

[DaveWM]

if it has those blue plastic caps they are prob ok, all mine were. look for that 39k resistor and any others that are 5% marked. IIRC it was pretty resistor drift that caused the issue. really doubt a vert out xformer, check the vert osc plate supply from boost, look for drifted high 2.2 meg and check pot for height.

You do have the conv board plugged in right?

[miniman82]

Conv board wasn't plugged in, does it matter? I did see a note in my fold out book for the 15 and 16 chassis that without it height won't be full. I'll give it a shot with the board plugged in.