Yet another Zenith To identify

[Dreamsbeard]

Originally Posted by Electronic M

The white things in the second pic are power resistors...Ceramic (white) safety caps are tubular not rectangular.

Ok, thanks, I was worried for an instant there. I can't see any white tubular caps then. So there is only 1 safety cap on that chassis? I seems to remember CC1 had more.

[zeno]

Originally Posted by Dreamsbeard

Ok, thanks, I was worried for an instant there. I can't see any white tubular caps then. So there is only 1 safety cap on that chassis? I seems to remember CC1 had more.

"Safety" cap is under hoz out heat sink. Its a G-line set so you are OK.
History ( IIRC )
C line flat chassis 2 safety caps 22-5001
D & E line flat chassis 5 caps 22-5001
E line upright runs under 401 5 caps
E- line upright runs 401 & higher one big 4 lead cap
from E line on they all use one cap. Any white safety caps
in any of these chassii should be changed to the newer orange drop
style. Be sure to use the right one as there are several different ones.

73 Zeno