Moby Dick and His Three Friends

[vts1134]

Originally Posted by Kamakiri

Um, unless you have a second entrance for that basement, I don't see how you gonna do dat

I think it will fit down the doorway size wise, I just need to remove the chassis so it can be done weight wise. The GE is unbelievably heavy... I think I need to install a loading dock and lift .

[vts1134]

By the way, if anyone is near the Pittsburgh area and would like to bring the RCA back to life let me know. I think you could make one nice set out of the two.

[Zenith26kc20]

Oh, and I thought I was off the deep end.
Love em!

[hi_volt]

Originally Posted by Zenith26kc20

Oh, and I thought I was off the deep end.
Love em!

Dude....we're ALL off the deep end.

[vts1134]

Anyone know where I can find a schematic on the Crosley 348 Swing-A-View?

[Steve D.]

Originally Posted by vts1134

Anyone know where I can find a schematic on the Crosley 348 Swing-A-View?

This may be a start: http://www.earlytelevision.org/pdf/c...8cp_manual.pdf

-Steve D.

[benman94]

IIRC, that set uses a 7F8 for the local oscillator in the tuner, and an unusual IF frequency. Be prepared to buy many, many 7F8s. You'll need to swap them to find the least drift prone example, or else put up with adjusting the fine tuning every few minutes for the first half hour of operation.

[vts1134]

Originally Posted by Steve D.

This may be a start: http://www.earlytelevision.org/pdf/c...8cp_manual.pdf

-Steve D.

It's a good reference, but no schematic there.

[baursam]

John, I found it in Riders Volume 2 complete with schematic . Can make a scan when back in office on Monday

Ross

[madRad45]

Originally Posted by baursam

John, I found it in Riders Volume 2 complete with schematic . Can make a scan when back in office on Monday

Ross

Looks like the Rider Volume 2 info is also on the ETF site, including the schematic...

http://www.earlytelevision.org/pdf/c..._rider_tv2.pdf