Servicing 1988 Sony TV

[dtvmcdonald]

I got my caps from Mouser today and git it ALMOST recapped (the 105 degreeC electrolytics only.)

But I hit a snag ... two caps are 0.47 uF 50 volt Non-Polarized ones. I did not
notice that ... they parts sheet does not say so, and I assumed that when examining
them physically the polarity bar was in a hidden position. The only suggestion
that they are non-polarized is an obscure symbol on the schematic instead
of the usual polarized one. If I had ordered two more 1 uF 50v regular caps
I could use two of those back to back, which will barely fit.

I will see tomorrow (they closed 4 minutes before I arrived!) if our stockroom
has something that will fit. All my .47 uF film caps are 630 volt and too large.
Otherwise its another week and $5 for postage from Mouser.