|
|
|
#2
08-19-2016, 01:59 PM
|
|||
|
|||
|
a tip, do the Purity setup BEFORE the convergence, they interact. Also let it warm up for at least 20 min. The deluxe chassis has that odd convergence that uses DC for the static (electromagnetic vs PM)derived from the cathode circuit of the horz out IIRC. Nice in that you can do the static with pots (if they are still good) from the front of the chassis, but seems like it would go out of static as the tube aged.
Last edited by DaveWM; 08-19-2016 at 02:04 PM. 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode