|
|
|
|
|
#1
09-10-2016, 12:19 PM
|
||||
|
||||
|
Here are some shots after the filter caps were replaced. Produces a crystal clear B&W picture, but color isnt looking good. Have to pretty much turn the color knob all the way up to get any color, but the hue is all wrong which I contribute to purity issues since the set is in a different position than the one it was in the last time it was powered up. Still have that pesky interference that comes in when the color is turned on. And it looks like the element on the electron gun is a bit discolored so that may explain why this tube is a bit weak at 6v. Everything is going well so far. Now I need to do a full recap.
__________________
 Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring) 
|
|
#2
09-11-2016, 11:46 AM
|
||||
|
||||
|
Ive noticed that this crystal in the color circuit rattles when I tap on it. This doesnt seem right.... Might need to buy a replacement. This might contribute to the incorrect colors.
__________________
Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring)
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
