The Zenith/Bose set with chinese cabinet

[zeno]

Change EVERY electrolytic cap on the vert module & check for
cold joints. The vert IC has been NLA for yrs so you dont
want it to blow over a few bucks worth of caps!
Also go over the power supply & HV modules for cold joints &
swollen 'lytics.
CRT looks fair with some red bleeding. Running it & adjusting
it "down" a little will help.
This is a "Digital System 3". after the video detector everything
is digitalized for processing. This model is VERY rare & the
most expensive in the line. If a 27" would have been $1,500- $2000.
A non Bose 27" table model DS3 was $1000......
Please keep it & keep it intact !!!!

BTW "digital" sets like this using the ITT chip set were also sold by
NEC, Toshiba Panasonic & maybe MGA. Zenith sold by far the
most from 20" to projection sets.

73 Zeno
LFOD !

[pac.attack76]

I'll definitely be fixing then. Soon as I get into it, ill go over everything.