|
Okay, guess I should give a little more detail. I can't get the setup line as outlined in the service manual. I have to turn up the brightness and contrast to get it to show, but then the accuracy of the adjustment is off. That's why I used the grid of the generator as allowed fine tuning.
There is nothing wrong with the CRT, it has been fully tested. I am not having any issues with this set other than not getting the setup line as described in the SM and the jailbars. The picture is darn good until the bars become noticeable. I do notice that on scenes that (and I don't know if this is the right term) have blacker than black, the bars are not noticeable and the entire screen is black. When the black is at normal, the bars are quite noticeable. Another reason I feel the ABL might be the culprit.
Thanks!
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|
10-17-2016, 11:20 PM
Hybrid Mode
