|
|
|
|
|
#1
10-20-2016, 11:22 AM
|
||||
|
||||
|
Most of the problems with those regarding shutdown is centered around the 5V Standby to the micro. There are several caps off the 5V SB/SBF line that go bad. Most are small value - 1, 2.2 or 4.7uf - the one closest to the EEPROM went bad often.
Most of these sets had the dreaded weak CRTs - I'd make sure the CRT was good before pouring any effort into it.
__________________
Brian USN RET 22YRS (Avionics/Cal) CET-Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
