|
Have you always had this problem?
When it comes to CB's, many people take them in to have them "peaked and tuned". Oftentimes this peak and tune involves disabling the modulation limiter and/or spreading the trap coils in the rear. Doing either of these will cause the radio to bleed. But it makes the CB techs Dosy meter show those "feel good" watts that aren't going out on the channel Nel you're on, but they ARE going out as harmonics on other frequencies.
First thing I'd try though are some snap chokes on the ends of the coax.
Has the radio been peaked and tuned?
|
12-29-2016, 08:08 PM
Hybrid Mode
