Quote:
Originally Posted by bandersen
Yep, ringing in the horizontal yoke. Check the 56pF cap or 1K resistor hidden in the yoke.
|
Could either of those parts also be the cause of my raster being off-center to the left and my horizontal centering control being pretty much non-functioning?
Quote:
Originally Posted by old_coot88
To avoid a possible wild goose chase, it might be worthwhile to ascertain that the bars are deflection-based, and not in the video chain. Shunt the CRT control grid to ground with a cap, which kills the video. If the bars are unaffected, they are in the deflection system. Cap value not critical, anywhere from .047 - .1 or so.
|
I'll give that a try tonight.
02-17-2017, 02:42 PM
Threaded Mode