|
|
|
|
|
#1
02-21-2017, 05:36 PM
|
||||
|
||||
|
I'll look around for any shorted wires, but my next order of business is to figure out how to get rid of the interference when the chroma signal comes in. It makes the picture unwatchable. I also have a bit of artifacts on the black and white signal now. I may just shotgun replace all resistors on the video board for good measure, but the chroma signal interference might be a different story.
__________________
 Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring) 
|
|
#2
03-21-2017, 06:32 PM
|
||||
|
||||
|
Got a new oscillator crystal courtesy of Phil Nelson (Thanks a bunch). I got it awhile ago in fact. I just haven't had time to get back to the set until this weekend. Hopefully replacing the bad crystal will clear up some problems. It's been almost a year working on this set and i've still got a ways to go.
__________________
Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring)
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
