Ts18 verticle problem

[EdKozk2]

Timmy,
I compared the Sams schematic to the Riders for the TS-18 chassis. There seem to be a few differences and maybe errors. I' ll use Sams part numbers. Resistor R-59 should be 22 meg not 2.2 meg. Resistor R-56 is shown as 150K ohms not 100k. Also make sure C-61 through C-68 are the correct replacements,
voltage and tolerance wise. If trying these changes don't slow down the vertical then you can try increasing the capacitance of C-64.
Ed