|
|
|
|
|
#1
08-14-2017, 09:08 PM
|
||||
|
||||
|
You didn't say which terminals of the contrast you are connected to, but if you don't disconnect one end, you will read a bunch of other things in parallel, particularly the delay line and its 1.2K input resistor. So, the 1K reading is probably normal or close to it for an in-circuit reading. I would just wait to see what the replacement coil does for your ghosting, rather than disconnecting things unnecessarily.
|
|
#2
08-15-2017, 04:30 PM
|
||||
|
||||
|
Just ordered new coils and resistors. Found another coil that was bad L94 that read about 1 meg when it should be 27 ohm.
__________________
 Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring)
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
