CTC-4 Director 21

[SwizzyMan]

Originally Posted by old_tv_nut

Suggestions:

1) make sure the value isn't off by a decimal place or something
2) check for open resistor in parallel with either L72 and/or L71

If it's not those, check all other parallel L-R combos in the video amp chain.

Value is fine. Checked all coils and resistors that may be in parallel with them and they all check fine except for a coil on the B-Y amp that reads 1.2 meg, but I dont think that one really matters for my current problem. I hope its not the delay line causing this!