"Pilot Radio" magnifier decal repro?

[decojoe67]

Originally Posted by ChuckA

Here's what I have so far:

I do need the over all size of the decal and spacing between the words. Also if it is on the front of the flange or on the rear. Needs to be reversed if on the rear.


Chuck

I took my magnifier down and measured the ghost imagine of the original decal.

1. The decal is on the front of the flange above the bubble. Steve D.'s previous post above has a good close-up reference pic.
2. The overall length of both words is 3"
3. The height of the words is 3/16ths
4. I would say the spacing of the two words from the bottom to the "T" to bottom edge of the "R" is also about 3/16ths.

Good luck Chuck and thanks.