|
|
|
|
|
#1
11-26-2017, 07:48 PM
|
|||
|
|||
|
I replaced the 2 560 ohm yoke resistors and the 56pf 1Kv cap. I used a 56pf 3Kv COG disc cap. None of these 3 components were listed in the Sams parts lists but were listed in Riders.
 
Last edited by Crist Rigott; 11-26-2017 at 08:54 PM. 
|
|
#2
11-26-2017, 08:56 PM
|
|||
|
|||
|
Tomorrow I should be able to attach the yoke and focus coil wires. Then do my resistance check. Then if all is good, then the first power up.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
