The Silvertone 6407/8/9 odd dial

[jr_tech]

Yes, I had to pry a bit on both sides below the two screws to get it started, then it slid out fairly easily.

jr

[decojoe67]

Originally Posted by jr_tech

Yes, I had to pry a bit on both sides below the two screws to get it started, then it slid out fairly easily.

jr

You've been a great help Jr. Thank you. I will likely try to put a dial cover on mine at some point - Joe

[decojoe67]

You inspired me to go ahead and install the dial lens Jr. It has to be a very small strip because the pushbuttons need to clear when you install the chassis. I like the set better with some reflection on the dial. It really cheapens a radio when the dial lens is missing. I took another photo and you can see a little reflection of the cover. I also turned the lights down and only then you can see the soft glow of the dial lamp.