|
|
|
#4
01-01-2018, 01:02 AM
|
|||
|
|||
|
Axial is preferred, but radial just won't be as pretty. There is no circuit restriction. The Sprague .068uf @1000V are a bit spendy at about 8 a piece with shipping. My current idea is to use 2 0.033uf @1600V (which I can purchase from the site) and placing them in parallel to obtain 0.066uf which is pretty darn close. If this doesn't work out, I may go after the Sprague capacitors.
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode