Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Things with Motors

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #24  
Old 01-07-2018, 11:03 AM
mr_rye89's Avatar
mr_rye89 mr_rye89 is offline
VideoKarma Member
 
Join Date: Jul 2015
Location: The Luna's
Posts: 438
+1 on the cheap OBDII code reader, worth every penny.

my car (01 miata) would miss and bog when I was on the freeway, scary stuff. I replaced the engine ground strap and both ignition coils (hybrid coil on plug/wasted spark setup with short wires to jump to the other spark plugs) solved that problem. It still is kinda hard to start so I'm gonna see if she will throw a cam sensor code.......

Sometimes code readers don't work though. Last summer my grandma's Buick (3100 v6) just wouldn't start one day. I plugged in the reader and got no fault codes! I determined it wasn't getting spark, tested the DIS igniter module (under the 3 dual tower ignition coils), replaced the crank sensor under the damn harmonic balancer, and still no fire. turns out it was the OTHER crank sensor that plugged into the lower side of the engine block (facing the firewall/subframe) I replaced that and it fired right up.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:00 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.