Crosley 9-403M Restoration

[Crist Rigott]

As my usual practice, I labeled all the tubes, resistors, capacitors, coils, inductors, and transformers according to the Sams docs. I also label all the terminal strips.

There was only 1 resistor that was in the chassis that wasn't covered in the Sams. See if you can spot it in picture #2. I also found a mistake with the value with C56. Sams has it listed as a .002uf while it should be a .003uf which was installed and Riders has it listed as a .003uf.

Now I'm ready to start re-stuffing the E-Caps.

[Crist Rigott]

While I'm posting pictures I thought I would show you guys 2 capacitors that this set uses.

C35 is a 4pf IF Coupling capacitor. C26 is a 2.5pf IF coupling capacitor.