Attempting first project - Some questions if I may

[albanks]

I finally got around to tackling this project. I simply cut out all the old electrolytics and soldered in the new ones. My beginner soldering job was kind of sloppy but apparently good enough for the electricity to pass through. I didn't even bother to rebuild the can. I was originally under the impression I would be cutting out ALL the capacitors which is why I found it so daunting. I was under the idea that film capacitors should be replaced. Set has been on for about 2 hours, no problems. During the first 20 minutes picture was occasionally jumpy. I guess it either wasn't warmed up or the settings weren't adjusted properly. This is a 1971 Zenith. Speaker is starting to get tinny, don't know where to go for that problem.