Vert hold/control ?

[Wind157]

I can just replace it based on the value printed on it. Set seems to work the same with or without it so keeping it, well it's replacement.
The sams also says this cap has a 3300 uf so I assume that off to.

[Wind157]

Never that was a disc, the Sams image is a bit hard to tell where it's pointing in some cases

[Electronic M]

Originally Posted by Wind157

I can just replace it based on the value printed on it.

Before I could read bumblebee caps I once had a sam's value error royally screw up a resto...Ever since then I replace all caps based on the printed value on the body of the capacitor if it is humanly possible to read it.

[Wind157]

I see what you mean, just ordered my last set of caps only to find on is listed as 0.0047 uf but the printed cap I pulled is 0.0015. ugh, guess I get to make another order

[Wind157]

Replaced all the caps and the set is working great. Thanks for all the help.