My CTC-16XL Project.

[Rocket]

Originally Posted by Electronic M

If they are barely inside tolerance I leave them if the circuit works and change them if it doesn't... especially if it is something tuned that I rather try retuning by resistor than alignment...

I wonder if that's what I did

[Yamamaya42]

Originally Posted by Rocket

I wonder if that's what I did

my fear is that once that I go through the IF board and check the resistors. that I will still have a IF problem...
and have no setup to align it with
As mentioned, I have no idea what was done to it before I got it T_T