My CTC-16XL Project.

[Yamamaya42]

I believe I have found an error in the Sams for the CTC-16, (surprise surprise ) this is present on both the 16 and 16x versions. (sams 818-2 & 736-4 ) .

If you were to look at the waveforms on the input to G1 on the burst amp on both, one is marked for color input ( square symbol ) but It shows no video information between the pulses, the one above does.
I have checked the sams for the CTC-15 & CTC-20, and they are opposite of what is shown here.
Video information is seen on the lower waveform ( marked for color ) and none on the one above, somehow they are backwards on both CTC-16 schematics.
To me it has always made more sense for it to be the other way around, thus I was looking at other schematics.