My CTC-16XL Project.

[Yamamaya42]

Originally Posted by old_tv_nut

Can you give us a schematic of where you are connecting it in the set? If the amp is built right it should give the specified gain, but maybe not if you connect it to a point that loads it down.

I did not even attempt to hook it up, I looked at the wave on the scope and it was hardly 1.2v ptp out, unhooked to anything.
the goal is to have it hooked to Point B ( L9 ) test point one.
And i DID recheck the work, It just dud not put out 3v ptp