Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 08-12-2019, 12:40 AM
vortalexfan vortalexfan is offline
VideoKarma Member
 
Join Date: Sep 2018
Location: Northern Indiana
Posts: 1,985
OK so I was finally able to get the chassis out of my Meck/Philharmonic TV and repopulated the chassis with known good tubes from my tube stash and plugged it in to test it out and when I turned the TV on all of the tubes including the Picture tube started glowing but then a few seconds later the 5U4G Rectifier tube for the power supply starting sparking and arcing inside so I quickly turned it off and unplugged it.

Any ideas as to what could be causing the arcing 5U4G Rectifier tube? thats the only tube in the whole TV that was arcing the rest of the tubes were working fine.

I did notice that the Power supply filter caps (which are in a cardboard can) was snapped off from its phenolic wafer that held it to the chassis (the phenolic mounting wafer that the capacitor can was mounted to itself was snapped off from the chassis not the capacitor can itself).
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:57 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.