Quote:
Originally Posted by trinescope
Maybe there were quality problems with these sets as mine also had several bad solder joints that I know of. One was on the 410V B+ line, killing the sweep oscillators and horizontal output intermittently, also causing an arc at the red screen control which had to be repaired using india ink on the end of the resistance track. The other one I found so far was a terminal strip ground in the color amplifier section which lifted the cathode circuits of the red, green, and blue amplifiers, also intermittently.
|
Did you find arcing in the HV cage? Mike had to insulate the caps, tubes and the walls of the cage. I will pass along your faults to Mike, if he hasn’t already checked those points.
08-20-2019, 03:54 PM
Threaded Mode