|
|
|
#10
09-10-2019, 10:05 PM
|
||||
|
||||
|
Agree the source of your excessive current draw is not the 500 mfd cap, but it needs to go none the less. Since you apparently have the Sams folder now, how about checking out the resistance readings chart on page 8. For starters check the resistance from the 5U4 filament pins(2,8) to chassis ground. Chart says there should be approximately 22,000 ohms there.
|
| Audiokarma |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode