1949 Sparton 4940 mirror lid set.

[Phil]

I have one of those. The tuner is an unusual arrangement. It is built like a large series of slide switches, for lack of a better way to describe it. The tune circuits are on a "sled" which slides back and forth when the channel selector is moved. This set has several odd design elements for its time. For one thing it uses a osc./amp to produce the HV. It is independent of the sweep. My experience with those is that they seem to be problematic. I have never had any trouble with the Sparton. It produces a very good picture and is one of my favorite and most watched sets. I'm fairly sure mine does not have channel one and it definitely covers 2-13. I wonder if is possible the one is from 11?
The prop rod holding the lid up would be of some concern to me. It shouldn't be there. One of the nice things about this set is that the lid can be opened to any angle, so it can be adjusted to be viewed at a wide variety of seating heights. The power switch is operated by opening the lid.
This site offers some insight into the circuit: http://members.iinet.net.au/~cool386...n/sparton.html

The biggest issue I had in restoring mine (all electrolytic and paper caps replaced before ever applying power the first time) were bad mica caps and resistors drifting with temperature in the vertical and horizontal oscillators. I think I wound up replacing ever cap and resistor in the oscs before they ever became stable.

I hope you grab it. They are really a very nice set.

[decojoe67]

Originally Posted by Phil

…. I'm fairly sure mine does not have channel one and it definitely covers 2-13. I wonder if is possible the one is from 11? …...

That must be it because I've always known that set to be from 1949, and no set had channel one on the dial by then. I also want to say that although the set never caught on much with collectors, it is definitely still an oddity. I'd have one myself if I had the space.

[mr_fixer]

Originally Posted by decojoe67

That must be it because I've always known that set to be from 1949, and no set had channel one on the dial by then. I also want to say that although the set never caught on much with collectors, it is definitely still an oddity. I'd have one myself if I had the space.

I ran the channels from 1 to 8 where it stopped "because of some sort of bind up?" I dunno i'm not sure where up north this set came from, maybe Michigan. Did Canada broadcast on channel 1?

[decojoe67]

Originally Posted by mr_fixer

I ran the channels from 1 to 8 where it stopped "because of some sort of bind up?" I dunno i'm not sure where up north this set came from, maybe Michigan. Did Canada broadcast on channel 1?

Some early post-war sets like Philco had only 8 channels to select from, which is really all you needed. That is very likely the case with the Sparton. You could choose the slugs in the tuner to receive which were available in the buyers area. From what I know no stations ever broadcasted on channel 1.