|
|
|
|
|
#1
12-12-2019, 10:07 PM
|
||||
|
||||
|
Finally found the issue, but have been unable to remedy. I removed the 1B3 socket and fired it up outside the cup. As soon as the HV came up, I saw arcing between the pins of the socket. There was also arcing from the pins to the body of the resistor itself. I tried bending things out of the way, and tried coating with super corona dope, but have had no success. Any idea how to get it to stop arcing?
__________________
"If it isn't broke, you aren't trying hard enough" 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
