|
|
|
|
|
#1
12-14-2019, 07:36 PM
|
|||
|
|||
|
Today I got my Super Corona Dope and I have been working in the HV cage trying to fix my ozone problem. I have found some spiky soldering on the pins I fixed, I coated everything in the corona dope, and I changed the 1x2 as I am thinking it might have a hairline crack. I also noticed I was just starting to get a little high voltage leaking from the tire of the flyback if I blew on it. I painted the tire on the flyback with corona dope and that fixed it. The tire itself looks fine, no cracks or anything. Still appears if I blow air I am getting a little corona around the socket of the 1x2 where the tube goes in, it is almost like its forming between the pins on the tube side.
|
|
#2
12-15-2019, 03:09 PM
|
|||
|
|||
|
Today I worked on fixing the internal antenna. I had a few great ideas from people here. I ended up using Elmer's glue and gluing the foil back to cardboard. I was missing a couple of pieces but after a look around the cabinet I ended up finding them. When I was done I hooked up my meter and I am getting continuity through it, how good of antenna it will make however I really don't know. But at least it looks better.
 [/url] [/url]
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
