![]() |
|
|
|
#1
|
|||
|
|||
|
Ok, that answers my question. Hopefully repainting the dag coating on the picture tube will repair my remaining issues.
|
|
#2
|
|||
|
|||
|
Only if the dag is arcing due to bad ground, isolated 'islands' etc. will it cause the problems described earlier. The arcing generates crazy amounts of hash that gets into the signal chain.
|
|
#3
|
|||
|
|||
|
Which I think is what this tv is doing.
|
|
#4
|
|||
|
|||
|
If the dag is arcing, you should be able to see it in a darkened room.
|
|
#5
|
|||
|
|||
|
I think I was seeing it arcing, if you take a look at the video I uploaded onto YouTube showing what the TV was doing when it was operating, you can see a lot of flickering in the screen which is I think the dag arcing.
|
| Audiokarma |
|
#6
|
||||
|
||||
|
Quote:
John |
|
#7
|
|||
|
|||
|
Exactly. But since the TV has mostly Mylar caps in it except for the 8 paper caps that were in the vertical section and that were coupling/decoupling the H-output tube the TV shouldn't be having too many problems since I had replaced those aforementioned paper caps and the electrolytic can caps are still functioning as they should.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|