|
Back to work. As per advice I'm measuring all that is measurable on this set. All coils ohm out as per the schematic. Resistors as well with some exceptions. These are pretty much all the 1 watt resistors, and seem to have a molded sort of body. They are all measuring extremely low. Below is an example. Shows as 47K on the schematic and that's what the colour code says... Measures out at 561 ohms. I'm used to seeing old resistors measuring high, but this set's seem to be doing just the opposite. Just the molded body ones.
Anybody seen this?
Last edited by Donj; 05-10-2020 at 11:24 PM.
|
05-10-2020, 09:29 PM
Hybrid Mode
