Magnavox TV tunner trouble

[jbattles]

there's a i.c by the tuner that controls it. that i.c is bad i cant remember what it is called post a pic of the chassis and i could tell you where it is at.

[zeno]

Looks like the AFT is bad so the set isnt stopping tuning.
Try easy first. Go into menus & set the band to "AIR" & the AFT
to "NORMAL". See if that helps. After that a chassis pix may help.
You can also lightly tap around the tuner, micro & jungle IC &
maybe get lucky with a cold joint.

73 Zeno
LFOD !

[liammc00]

Pictures of the chassis. I also checked for cold soldier joints didn't find any. The TV is set to antenna mode and haven't found a way to change the AFT.

[zeno]

Under the antenna input there is an area on the PCB that looks
greenish. Also the input looks rusty. Anyhows clean up that green mung
with a brush & 91% isopropyl alcohol & a brush & try when dried.
Looks like water damage...

73 Zeno
LFOD !