Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 02-24-2021, 06:41 AM
JohnCT's Avatar
JohnCT JohnCT is offline
VideoKarma Member
 
Join Date: Jan 2020
Posts: 749
The service menu isn't going to help you. Even if you can get just the vert and horiz readjusted, I can promise you that there are parameters all over the place that are kludged.

You've got a corrupt eeprom caused by bad grounds in 1) the tuner, 2), the LV regulator heatsink ground tab and 3) the horiz output heatsink ground tab.

When these used to come in, I wouldn't even open them up. I'd call them a couple of hours later and give them the estimate, then repair and upgrade the chassis. I would do between 5 and 10 of these a day including several from other servicers.

Towards the end of their run, that series of chassis also had two electros in the power supply that had to be changed as well.

I don't know if anyone on youtube has the procedure videoed, but the tuner grounds must be done immediately along with the heatsink ground tabs. If you were to install a new eeprom, or realign the original eeprom, it would end up being corrupted in minutes.

John
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:05 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.