|
|
|
|
|
#1
04-14-2021, 10:24 PM
|
|||
|
|||
|
I tried to make an antenna in a style similar to the one that's on the Zenith J733 Clock Radio which was using a rubberized metal cable clamp that was riveted to the cord along with a 6" length of wire and I hooked that wire to the internal antenna terminal on the back and left the int. antenna jumper in place but it doesn't seem to be working right.
Any ideas as to what's going on with my setup, and why its not woring? 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
