Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Flat Panels & Digital Format

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 06-13-2021, 06:15 PM
JohnCT's Avatar
JohnCT JohnCT is offline
VideoKarma Member
 
Join Date: Jan 2020
Posts: 749
Quote:
Originally Posted by kf4rca View Post
Surprised they decided to go with smaller LEDs. Certainly reducing the size compromises reliability.
Strangely, the tiny glass chip LEDs don't fail like most (either open or short). They continue to operate just fine. The problem is that the phosphor added to the LED (which has a natural blue color) burns off with continued use. The diode junctions themselves are remarkably stout. I'm sure they thought these tiny chip LEDs would fix the LED issue.


Quote:
Originally Posted by kf4rca View Post
I was hoping someone would come out with a design that would allow LED replacement from the back panel.
There actually is one. There's a 75" TCL that uses an edge lit system, and the LEDs are available at the bottom of the screen under the address boards and can be replaced without touching the screen itself. As long as you don't knacker the flex ribbons, you should be OK.

John
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:06 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.