Admiral 17T1: Never Give Up, Never Surrender

[Notimetolooz]

OK, I see now that the ceramic discs C37 and C38 in your pictures are 0.001 uf. It is a bit hard to read the value, I thought that they might be marked 100 (on some earlier ceramic discs (or even mica) that might mean 100 pf) not 102. Unless ceramic caps won't work there they should be OK.

So you haven't made it clear how you think R41 was connected if it didn't match the Telaides.
What schematic would show that.

I assume that you have already replaced the horizontal size pot R46.

[Winky Dink]

R41 is directly connected from the sweep of the horizontal size pot to pin of V12. As show in this photo, it is the original factory connection. Yes, I did replace the pot.

Adm 17T12 5017 by H Boyars, on Flickr

Also, since the question arose about some voltage data, here's a full run done last night. It's basically the same as it was in 2020 and 2018.

Adm 17T12 8910 by H Boyars, on Flickr

Thanks once again.
Winky