Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Recorded Video

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 02-11-2022, 10:24 PM
dishdude's Avatar
dishdude dishdude is offline
VideoKarma Member
 
Join Date: Feb 2014
Posts: 841
Quote:
Originally Posted by starbond View Post
The only reason I say may is because i found about a dozen pf these tiny strands of tape inside the transport area, its slightly possible one shredded into the gap on the video head while spinning, I really hope
its not a blown head. But i have only put $10 into this unit at this point so if it turns out the head it dead then at least it was a learning experience how to troubleshoot a power supply
Attachment 203934
It looks like something is misaligned in the tape path and shaving the tape off!
Reply With Quote
  #2  
Old 02-14-2022, 05:48 PM
starbond starbond is offline
VideoKarma Member
 
Join Date: Sep 2019
Posts: 81
Quote:
Originally Posted by dishdude View Post
It looks like something is misaligned in the tape path and shaving the tape off!
Its possible, but hopefully not.

Q4 arrived today, put it in the circuit and it STILL blows.
I tested diodes 1-5 on the circuit as well as Q1 and q2 which appeared to be still in spec
D1 is a bridge rectifier so its probably fine
D2 reads .5V forwards and OL reverse
D3 reads .6V forwards and 2V reverse
D4 reads .6V forwards and 2V reverse
D5 reads .6V forwards and 1.8V reverse
these were tested in circuit as the leads are so short, if i removed them i dont think id be able to get it back in.
Attached Images
File Type: jpg IMG_2468.jpg (106.7 KB, 66 views)

Last edited by starbond; 02-14-2022 at 06:24 PM.
Reply With Quote
  #3  
Old 02-20-2022, 10:33 AM
vortalexfan vortalexfan is offline
VideoKarma Member
 
Join Date: Sep 2018
Location: Northern Indiana
Posts: 1,986
Quote:
Originally Posted by starbond View Post
Its possible, but hopefully not.

Q4 arrived today, put it in the circuit and it STILL blows.
I tested diodes 1-5 on the circuit as well as Q1 and q2 which appeared to be still in spec
D1 is a bridge rectifier so its probably fine
D2 reads .5V forwards and OL reverse
D3 reads .6V forwards and 2V reverse
D4 reads .6V forwards and 2V reverse
D5 reads .6V forwards and 1.8V reverse
these were tested in circuit as the leads are so short, if i removed them i dont think id be able to get it back in.
D3-D5 on your VCR appear to be bad, because on diodes they're only supposed to measure voltage one direction, and you're measuring voltage (albeit a very small amount) in both directions, which tells me that D3-D5 might be part of your problem (and possibly something for me to check on my VCR as well.)
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:52 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.