Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 07-15-2022, 09:27 AM
Tony V's Avatar
Tony V Tony V is offline
VideoKarma Member
 
Join Date: Feb 2003
Location: Brookneal, VA
Posts: 892
I have one from the same era as this one. It has a beautiful picture except it has an hour glass shaped raster at the moment. I never dug into it to figure out the cause but is on my to do list.
Reply With Quote
  #2  
Old 07-15-2022, 11:35 AM
zenith2134's Avatar
zenith2134 zenith2134 is offline
VideoKarma Member
 
Join Date: Feb 2005
Location: UTC -4
Posts: 2,543
Quote:
Originally Posted by Tony V View Post
I have one from the same era as this one. It has a beautiful picture except it has an hour glass shaped raster at the moment. I never dug into it to figure out the cause but is on my to do list.
I'd be more than happy to help you diagnose it if you'd like. If the raster still fills the screen horizontally, it may just need the pin amplitude adjusted like mine did. Common. I also had to change out a couple of open capacitors but it was still an easy fix.

If the picture is shrunken horizontally you should look at the horiz drive voltages and see if your HV is at the proper level to rule out the flyback. I've seen a 70s Sony with short width and it was caused by the horiz linearity control. Some sets do not even have that control though.
Reply With Quote
  #3  
Old 07-19-2022, 02:43 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
Quote:
Originally Posted by Tony V View Post
I have one from the same era as this one. It has a beautiful picture except it has an hour glass shaped raster at the moment. I never dug into it to figure out the cause but is on my to do list.
Easy. 1mfd (IIRC) off the pin amp control.
Reply With Quote
  #4  
Old 07-20-2022, 11:57 AM
zenith2134's Avatar
zenith2134 zenith2134 is offline
VideoKarma Member
 
Join Date: Feb 2005
Location: UTC -4
Posts: 2,543
Mine needed two replaced. Both 1mF 50V
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:37 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.