Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 08-14-2022, 04:05 PM
Chris K Chris K is offline
VideoKarma Member
 
Join Date: Jun 2022
Posts: 1,518
Quote:
Originally Posted by Boobtubeman View Post
14 pages later, and Still not running.... Thats ONE-- STUBBORN-- TELLY!!

Keep up the fight... Success will prevail...

SR
Well...the Captain at the helm ain't exactly performing the best!
Reply With Quote
  #2  
Old 08-14-2022, 06:16 PM
Boobtubeman's Avatar
Boobtubeman Boobtubeman is offline
<---WANTED: Motorola 17P6
 
Join Date: Jun 2007
Location: Woodland Ca.
Posts: 931
Quote:
Originally Posted by Chris K View Post
Well...the Captain at the helm ain't exactly performing the best!
Stay with it... When the fault prevails itself, youll kick yourself over it for days sayin"how did i missed that?!"

Had that with an RCA with an audio problem. About a month later i discovered a ground wire tucked to the side i forgot to resolder when restuffed an e-cap.. Found it while going through some before pics.

SR
Reply With Quote
  #3  
Old 08-14-2022, 06:53 PM
Penthode's Avatar
Penthode Penthode is offline
VideoKarma Member
 
Join Date: Jun 2009
Location: Kitchener/Waterloo Ontario Canada
Posts: 1,463
I haven't read if the wax capacitors had been changed? I recently restored the same,set and changed most of them. The few I did not change were shunted by resistances much lower than the leakage e.g. 1kohm or 10kohm with leakage about 10Mohm.

The wax capacitors will be all bad. You will have to change pretty well all of them to get it to work.
Reply With Quote
  #4  
Old 08-14-2022, 08:06 PM
Chris K Chris K is offline
VideoKarma Member
 
Join Date: Jun 2022
Posts: 1,518
Quote:
Originally Posted by Penthode View Post
I haven't read if the wax capacitors had been changed? I recently restored the same,set and changed most of them. The few I did not change were shunted by resistances much lower than the leakage e.g. 1kohm or 10kohm with leakage about 10Mohm.

The wax capacitors will be all bad. You will have to change pretty well all of them to get it to work.
They're all gone...replaced with good quality Panasonic film caps and I substituted Rubycon electrolytics for all the cans.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:35 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.