|
|
|
|
|
#1
03-06-2023, 06:40 PM
|
|||
|
|||
|
Did some more troubleshooting and ultimately found the issue was the vertical output transformer. Installed a replacement transformer and I now get a full raster.
Next up continued testing & monitoring. 
|
|
#2
03-06-2023, 08:34 PM
|
|||
|
|||
|
Where did you manage to find a replacement horz lin coil?
|
|
#3
03-06-2023, 09:46 PM
|
|||
|
|||
|
To my surprise Talon Electronics had a Miller replacement coil in stock. I must have gotten the last one as they now show out of stock: https://talonelectronics.com/shop/item.aspx?itemid=6636. The failed coil was wound on a light blue plastic, the new Miller coil was on white. Part of me still worries that this one will fail in time too; to that point I installed a 250ma fuse to protect the HOT and flyback. The fuse holder also provided an easy access point to connect an amp meter to.
 I would think a person could search old parts catalog and look for a generic coil with a matching inductance range. The coil should come with the metal clip that locks into the chassis via drilling a small hole.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
