![]() |
|
|
|
#1
|
|||
|
|||
|
Congratulations!!
![]() Seems that Sony has changed the contacts; I have a working TV-700U, and the AC connector is separate and square (is older of course). Is possible to measure with a DMM to be sure in most cases, if is not possible to find some info about: the AC part will measure a fixed DC resistance (since is a primary of a power trafo); and the DC part will measure different, due to having capacitors and diodes/transistors in the path, measuring rising values until stabilize, and different values (on a diode scale) for a polarity than another. Trouble is, if is similar to TV-700U (it have the CRT heater direct connected to DC), the measurement is more confuse. BWT, be prepared to replace all electros in making restoration. My TV-700U have a great image, with plenty of bright, contrast and good sharpness (after full restoration).
__________________
So many projects, so little time... |
|
#2
|
|||
|
|||
|
https://www.radiomuseum.org/r/sony_tv_750tv75.html
In the rear stick on this photo (scroll until it appears), the AC seems to be on the smaller pins...
__________________
So many projects, so little time... |
![]() |
| Thread Tools | |
| Display Modes | |
|
|