![]() |
|
#11
|
||||
|
||||
|
This may help or hurt. Been 50 yrs & if wrong please correct.
Burst amp pulls the color sync off the horz blanking pedistal. It on the " back porch " and 8 cycles. Hoz osc pulses gives it the narrow grab, the burst tube amps it & passes it to the 3.58 for sync. No burst gives barber pole color or no color. The burst adj can "center" the tint range. Dead 3.58 gives a classic pink & green on many sets (RCA), no color, wrong colors, barber pole. Xtals do go bad but not often. If the XTAL has a third GND wire use that type. enuf Zeno |
| Thread Tools | |
| Display Modes | |
|
|