|
|
|
|
|
#1
07-12-2023, 08:29 AM
|
|||
|
|||
|
Do you have the proper camera to CCU cable? Very important as it tells the camera its feeding a CCU. What I'm trying to figure out is what exactly are you trying to do here... using a computer to do some type of RGB digital capture feeding an SVGA port?
|
|
#2
07-12-2023, 01:57 PM
|
|||
|
|||
|
Pretty much the last statement.
It's akin to what was done here: https://youtube.com/watch?v=ubIAsmq69L0 Sadly I have to use Windows with this method as both the card used and the other one I'm considering (startech) don't work 100% on linux. VGA was what I selected as the connector for convenience rather than route it through SCART which I have nothing that can work with that. This is more or less the cable I have: https://www.bhphotovideo.com/c/produ...to_14_pin.html Except about 6' rather than 164'. Last edited by sdsw4; 07-12-2023 at 03:00 PM.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
