Motorola roundie

[timmy]

Originally Posted by Yamamaya42

Do you mean the 3.58 mhz trap, next to the circuit breaker? this is part of the demod area, and not the oscillator.

Yes the one next to the breaker so I’ll leave that alone. The coils are the a17 a18 that won’t move and there has to be a better way to get them to move and there is no steel Allen wrench that would fit that I would only use the plastic. When I heated one of them it started to move but was really tight.

[Yamamaya42]

Originally Posted by timmy

Yes the one next to the breaker so I’ll leave that alone. The coils are the a17 a18 that won’t move and there has to be a better way to get them to move and there is no steel Allen wrench that would fit that I would only use the plastic. When I heated one of them it started to move but was really tight.

There is one that will fit, if you have a full set of sizes metric and standard, I have more than one of the correct size.

but unless they can be freed, you won't be able to set the color sync correctly.