Motorola roundie

[timmy]

And is it possible that the if alignment that i had touched in the beginning have anything to do with this color thing even though I get a great picture.

[Yamamaya42]

Originally Posted by timmy

And is it possible that the if alignment that i had touched in the beginning have anything to do with this color thing even though I get a great picture.

It very well could, there is a reason the alignment steps are numbered 1-8, each has an effect on the other in a way from very subtle to drastic, setup is a long delicate dance of back and fourth, up and down, round and round, you skip steps, jump around, and you can get odd results, very much like what you are seeing.

[timmy]

Originally Posted by Yamamaya42

It very well could, there is a reason the alignment steps are numbered 1-8, each has an effect on the other in a way from very subtle to drastic, setup is a long delicate dance of back and fourth, up and down, round and round, you skip steps, jump around, and you can get odd results, very much like what you are seeing.

Well you do make sense but in the beginning all was fine it’s only when it started acting up so the IF alignment didn’t change I haven’t touched it so still something triggered this condition. And the color IF I’m sure that didn’t change I haven’t touched that either if all was good befor then it still seems logical that a cap or resistor went bad bad somewhere.